Product attributes

• Advantages:

• enables the removal of valve seals without removing the head of the motor

• accessories for assembling pins from fi 5mm to fi 9 mm

• the accessories cover the following dimensions of spark plugs M10x1, M12x1.25, M14x1.25 and M18x1.5

• accessories for removing pins diameter fi 8mm, fi 13 mm and fi 16 mm

• accessories for assembling seals fi 12 and fi 14mm

• Usage:

• The individual piston is set into a lower position. In the place of the spark plug, an attachment for the pressure pipe is connected; the cylinder is filled with compressed air, which enables the valves to stay in the upper position.

• Find an appropriate attachment for pulling the pin, set it onto the cover of the spring, straighten the magnets with pins and press the springs by pushing with your hand.

• This enables the pins to be removed from the groove of the valve.

• Remove the cover and the springs.

• Take the valve seal removal pliers art. 2201/2BI, pull out the seals, take the accessories for assembling the seals, place the new seals.

• Place back the springs and the cover; place the pins and use the accessories for assembling the pins to compress the springs by hand, which enables the placement of the pins back onto the valve.

• Repeat the same procedure on all other valves, then remove the accessories for the pressure pipe and repeat the procedure on the next cylinder

• Tool tray dimension: 188 x 364 x 30 mm
• Compatible with drawers of Eurostyle, Eurovision, Europlus and Hercules (front drawers) line